About the Teamline 5140 system

The connectors

The following figure shows the connectors on the rear of the Teamline system:

Diagram of the Teamline 5140 connectors

  Connector Description
1 Power A DC +19V power connector. The system automatically adjusts to the supply voltage. Use the supplied power cable to connect the system to the power. Connect all other cables before connecting the power
2 Display 1 Mini display connectors. These connectors output video (1080p60 only) to the display
3 Network 10/100/1000 Mbit/s auto-sensing Ethernet port. Connect to the network
4 Microphone USB connector. Connect a StarLeaf microphone
5 Display 2 Mini display connectors. These connectors output video (1080p60 only) to a second display (if present)
6 USB 2.0 USB connectors for Pronto or cameras
7 Camera (USB 3.0) USB 3.0 connector for cameras


The Teamline 5140 system is designed so that it doesn’t need to be rack mounted; however, it can be wall mounted or mounted to the back of your display.

If you are using wireless (for example, Miracast) to connect devices to present content in meetings, ensure the system is not enclosed in a rack or behind a display. Otherwise, the wireless signal may not function.

Dimension Metric Imperial
Width 150 mm 5.9 in
Depth 152 mm 5.98 in
Height 57 mm 2.24 in

Was this information helpful?