Safety and Compliance: Teamline 5141

For legal information, including the privacy notice, end user license agreement, and GDPR compliance, go to


Install the Teamline 5141 only in accordance with the installation instructions in the Teamline 5141 Installation Guide.


Do not block any of the ventilation openings of the Teamline 5141.

Allow an adequate space around the unit to promote a good air flow for cooling of the Teamline 5141. Do not block the fan inlet or outlets. Ensure that the fan intake is not placed inline with the outlet from any other fan or convection cooled device. To avoid blocking the lower side vents do not operate the Teamline 5141 on a carpet or soft surface.


Do not remove the cover of the Teamline 5141. There are no user-serviceable parts. If you open the Teamline 5141 or remove its cover you will invalidate the warranty.

Power requirements

The Teamline 5141 must be connected to the approved AC/DC adapter (StarLeaf part number 712-00090 / Manufacturing part number FSP065-10AABA).

The table below shows the power ratings of the Teamline 5141:

Table 1: AC power ratings

Rating Value
Supply voltage range 100 to 240V 50-60Hz
Current rating 1.5A maximum

Operating environment

The Teamline 5141 must only be used indoors and within the following environmental conditions:

Table 2: Operating environment

Environment Temperature Humidity
Operating environment 0°C to 50°C 10% to 95% (non-condensing)
Non-operating environment -40°C to 60°C 10% to 95% (non-condensing)

Approvals information


The Declaration of Conformity is available on request.

Directive 2006/95/EC and 2014/35/EU (Low Voltage Directive):

  • Standard EN 60950-1

Directive 2004/108/EC and 2014/30/EU (EMC Directive):

  • Standard EN 55022 Class A
  • Standard EN 55032
  • Standard EN 55024
  • Standard EN 61000-3-2
  • Standard EN 61000-3-3

Was this information helpful?